category：Peristaltic pump hose
Imported high performance silicon rubber raw materials, platinum vulcanization process
High wear resistance, good resilience, long hose life
Avirulent, physiology is inert, be able to bear ultraviolet ray, be able to bear ozone, diaphaneity is tall
Resistance temperature range is wide, - 51 ℃ to 238 ℃ in normal use
Excellent weathering and aging resistance
Widely used in GMP pharmaceutical, biological engineering, fine chemicals, food and beverage and other fields
GMP pharmaceutical, biological engineering, fine chemicals, food and beverage and other fields
1.Adopt imported high performance silicon rubber raw materials and platinum vulcanization process
2.High wear resistance,good resilience,long hose life
3.Non-toxic,physiological inertia,uv resistance,ozone resistance,high transparency
Temperature range is wide,
4.Tolerance-51℃to 238℃in normal use
5.Excellent weather resistance and heat resistance to aging
6.Widely used in GMP pharmaceutical,biological engineering,fine chemicals,food and beverage and other fields
When transferring different fluids,the hose should show certain chemical properties,which is called chemical compatibility.Such as:low adsorption,good temperature resistance,not
Easy aging,inswelling,corrosion resistance,low precipitate,etc.
The chemical corrosion resistance decreases with the increase of temperature,and the chemicals that have no effect on the pipe at room temperature may have an effect on the hose with the increase of temperature
When the compatibility between a liquid and a hose is uncertain,a immersion test is required:take a section of the sample tube and record its weight,diameter,length and other parameters
Immerse the sample tube in an airtight container filled with liquid for at least 48 hours.Take out the sample tube,wash it with clean water,dry it and measure it again
Its weight,diameter and length,observe the change,at the same time check whether the hose soft or brittle,if there is a change,that the hose and the liquid is not phase
Capacity.If there is no change after test,the hose is compatible with the liquid.
Peristaltic pump application by the hose pressure performance.
If the system pressure reaches or exceeds the hose limit,the hose will swell,causing excessive hose wear or hose rupture.
Factors affecting the hose pressure are:material,diameter and wall thickness ratio.
The hose ADAPTS the working temperature is the user to consider the factor.Hoses of different materials have different temperatures.
The size of the hose has a direct impact on the flow,good pump design will consider the applicable hose inside and wall thickness,match the best hose size or pipe number
Range.The inner diameter of the hose determines the flow rate.The wall thickness determines the resilience of the hose and has a great influence on its service life.
Hoses may be certified for certain USES.Such as the United States pharmacopoeia standard EP,the United States food and drug administration standards FDA,the United States farmers
Industry standard USDA and national health foundation standard NSF.
Hose flexibility,elasticity and life:
Different hoses have different resistance to repeated extrusion and friction by roller.Different pipe type,pipe material,pump head and running speed have different life.
Service life in pump system is called flexible life,in a specific application,the characteristics of the pump is very consistent.Select long life,thick wall pipe,
Choose large flow pump,running at lower speed can get longer hose life.
|Tube number||Inside diameter（mm）||Wall thickness(mm)||Hose pressure （MPa）||Applicable head||Standard packing(m)|
|1×1||1||1||0.10||DG-1A,DG-2A,DG-4A,DG-6A,DG-8A, DG-12A,DG-1B,DG-2B,DG-4B,DG-6B, DG-8B,DG-12B,TH10A,TH10B||15|